产品介绍 Product introduction
PI复合硅胶皮 PI composite silicone rubber
PI复合硅胶皮是一款由PI film与高弹性有机硅橡胶材料结合而成的新型高分子材料,材料具有超薄、超平整度、的韧性等主要特性;它有力地结合了有机硅胶分子的导热性能、缓冲性能以及PI的独特韧性及稳定度,超薄且平整的材料是与传统缓冲材大之区别,其还具有厚度公差小、导热速度快、单个位置使用率高等优点,能满足许多有特殊要求的设备使用。主要适用于高要求的热压设备,可隔绝超高温产生的硅油与产品的直接接触,对温度有缓冲作用,使温度较为均匀,平坦的表面可防止异物的残留,以免影响热压头因有残留杂物而造成的热压效果,同时具有隔离保护作用。
PI composite silicone rubber is a new polymer material composed of PI film and high elastic silicone rubber. The material has the main characteristics of ultra-thin, super flatness and perfect toughness; It effectively combines the thermal conductivity and cushioning performance of organic silica gel molecules and the unique toughness and stability of PI. The ultra-thin and flat material is the biggest difference from the traditional buffer material. It also has the advantages of small thickness tolerance, fast thermal conductivity and high utilization rate at a single position, which can meet the use of many equipment with special requirements. It is mainly applicable to the hot pressing equipment with high requirements. It can isolate the direct contact between the silicone oil produced by ultra-high temperature and the product, buffer the temperature and make the temperature more uniform. The super flat surface can prevent the residue of foreign matters, so as not to affect the hot pressing effect caused by residual sundries of the hot pressing head, and has the function of isolation and protection.
产品型号Product model:
PI-G-0.1, PI-G-0.15 ,PI-G-0.2 , PI-G-0.25, PI-G-0.3 PI-G-0.45(灰色导热系列)
PI-B-0.1, PI-B-0.15 ,PI-B-0.2 , PI-B-0.25, PI-B-0.3 PI-B-0.45(黑色抗静电系列)
产品用途:
1、适用于各类新型(柔性屏、3D眼镜、OREDT、TP)COG与FOG绑定加热压合过程的防护、缓冲和隔离,可替代目前普通设备使用的氟材料、硅材料以及玻璃纤维等复合材料。
2、主要替代目前传统使用性能单一的压合材料,与传统压合材料比有更轻薄、更平整、导热快、受热均匀、不渗油等特点。
3、特别适用于恶劣环境(高温、耐油、高强度、高频率)生产环境下的使用。
Usages of product:
1. It can be applied to bonding procedure of COG and FOG for FPC,3D eyeglasses,OEDT and TP etc. As buffering tools.it can replace some composite glass fiber material such as fluorine,silicone etc。
2. It can replace traditional compress material majorly. Comparing to traditional composite materials, SIC products are more thin and flat. The thermal conductivity performs fast and evenly。
3. It can be applied to severe environment(high-temperature,high pressure,high frequency etc)。
产品特点:
1、厚度薄,厚度公差极小、表面平整、导热均匀。
2、耐高压、耐高温、耐老化。
3、不出油。
Features of product:
1.The thickness is thin, the thickness tolerance is very small, the surface is flat and the heat conduction is uniform.
2. High pressure resistance, high temperature resistance and aging resistance.
3. No oil。
产品规格:
1、(厚T:0.05--1mm*(宽W:5mm-1000mm)*(长L:5-100m)。
2、黑色(黑色抗静电系列)。
3.灰色(灰色导热系列)。
Product specifications:
1. (Thickness 0.05--1mm) * (width 5mm-1000mm) * (length 5-100m)。
2. Black (black antistatic Series)。
3.Grey (grey Series)。
PI复合硅胶皮性能参数:
Product model 产品型号 | thickness 厚度(mm) | colour 颜 色 | hardness 硬度(A) | Pressure resistance 耐压力(MPA) | proportion 比重(g/mm3) | Recommended temperature 推荐使用温度°C |
PI-B-0.2MM | 0.2 | 黑 | 70-80 | 10 | 1.3 | —40--250 |
Compression deformation rate 压缩变形率 % | Thermal conductivity 热导率 W/(㎡*k) | Antistatic index 抗静电指数 (Ω*cm) | Thermal weightlessness 热失重 % | Flame retardancy 阻燃性 UL | tensile strength 拉伸强度(mpa.Kgf/C㎡) | Maximum temperature 大温度 °C |
≤15 | 0.35 | 10的6次方 | 5 | 94-V0 | 0.8 | 285 |
上一篇:没有了
下一篇:PI复合硅胶皮 (2)