产品介绍 Product introduction

铁氟龙玻纤复合硅胶皮 Teflon glass fiber composite silicone rubber

铁氟龙玻纤复合硅胶皮是一款由 铁氟龙玻纤布表面经钠化处理与高弹性有机硅橡胶材料结合而成的新型高分子材料，材料具有超薄、超平整度、高强度的韧性等主要特性；它有力地结合了有机硅胶分子的耐热性能、缓冲性能以及铁氟龙的防粘性和玻纤布独特韧性材料是与传统缓冲材大之区别，，能满足许多有特殊要求的设备使用。主要适用于高要求的热压设备，可极大地提高压合的次数，降低生产成本，可隔绝超高温产生的硅油与产品的直接接触，对温度有缓冲作用，使温度较为均匀，平坦的表面可防止异物的残留，以免影响热压头因有残留杂物而造成的热压效果，同时具有隔离保护作用。

Teflon glass fiber composite silicone rubber sheet is a new polymer material composed of Teflon glass fiber cloth surface after sodium treatment and high elastic silicone rubber material. The material has the main characteristics of ultra-thin, ultra flatness, high strength and toughness; It effectively combines the heat resistance and cushioning properties of organic silica gel molecules, the anti adhesion of Teflon and the unique toughness of glass fiber cloth. It is the biggest difference from traditional cushioning materials and can meet the use of many equipment with special requirements. It is mainly applicable to the hot pressing equipment with high requirements, which can greatly improve the times of pressing, reduce the production cost, isolate the direct contact between the silicone oil produced by ultra-high temperature and the product, buffer the temperature, make the temperature more uniform, and the super flat surface can prevent the residue of foreign matters, so as not to affect the hot pressing effect caused by residual sundries in the hot pressing head, At the same time, it has the function of isolation and protection.

产品型号 Product model：

TP-GF-0.15,  TP-GF-0.25  , TP-GF-0.38 , (黑色抗静电系列)

产品用途：

1、适用于各类新型（柔性屏、3D眼镜、OREDT、TP）COG与FOG绑定加热压合过程的防护、缓冲和隔离。

2、主要替代目前传统使用性能单一的压合材料，与传统压合材料比有更轻薄、更平整、导热快、受热均匀、不渗油、更耐用等特点。

3、特别适用于恶劣环境(高温、耐油、高强度、高频率)生产环境下的使用。

Usages of product:

1. It is applicable to the protection, buffering and isolation of various new types (flexible screen, 3D glasses, oredt, TP) cog and fog binding, heating and pressing process.

2. It mainly replaces the traditional pressing material with single performance. Compared with the traditional pressing material, it has the characteristics of lighter and thinner, smoother, faster heat conduction, uniform heating, no oil leakage and more durable.

3. It is especially suitable for use in super harsh environment (high temperature, oil resistance, high strength and high frequency).

产品特点：

1、导热，缓冲，不出油，耐压。

Features of product:

1. Heat conduction, buffering, no oil, pressure resistance.

产品规格：

1、（厚T：0.15--1mm*（宽W：5mm-1000mm）*（长L：5-100m），黑色(黑色抗静电系列)。

Product specifications:

1. (thickness T: 0.15 -- 1mm * (width W: 5mm-1000mm) * (length L: 5-100m), black (black antistatic Series).

铁氟龙玻纤复合硅胶皮性能参数：