产品介绍 Product introduction

防静电硅胶防滑垫 Antistatic silicon film

防静电硅胶防滑垫产品特点

1、经特种硅胶开发而成的止滑垫，具有吸附力（表面光滑），放置在防静电托盘内可使手机模组、盖板等紧贴在垫面上，既柔软又有弹性，防滑的同时，消除静电效果更佳。

2、本产品不使用粘接剂，不发粘，不留痕迹，且耐高、低温度，可直接用水清洗，祛除止滑垫上的灰尘，可反复使用。

3、由于使用导电硅胶，在保持长久防止静电产生的同时，不会有炭黑脱落，不出硅油。

4、本产品为网状结构，故除具备止滑功能外，还有散热的优势！

5、产品可调成各种颜色（以黑色和米黄色为常用），可以调整表面的防滑效果

Product features of anti-static silicone anti slip pad

1. The anti slip pad developed by special silica gel has adsorption force (smooth surface), which can make the mobile phone module and cover plate close to the pad surface, which is both soft and elastic. While anti-skid, it has a better effect of eliminating static electricity.

2. This product does not use adhesive, does not stick, does not leave traces, and is resistant to high and low temperature. It can be directly cleaned with water to remove the dust on the anti slip pad, and can be used repeatedly.

3. Due to the use of conductive silica gel, while maintaining long-term prevention of static electricity, there will be no carbon black falling off and no silicone oil.

4. This product is of mesh structure, so in addition to the anti sliding function, it also has the advantage of heat dissipation!

5. The product can be adjusted into various colors (black and beige are the most commonly used), and the anti-skid effect of the surface can be adjusted